Shoe Storage Booster Stool

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves.  

If you need any help building this stool contact us

Comments

Post a Comment

Popular posts from this blog

Image
Tip to clean your Microwave It's easy to clean baked-on food and spills from your microwave Here's how: Partially fill a measuring or coffee cup with water and add a slice of lemon. Boil the water for a minute, and then leave the door closed and let the steam loosen the mess. After 10 minutes, open the door and wipe away the grime.     Contact us
Read more
Image
Tile That Looks Like Wood If you love wood but aren't crazy about the upkeep, check out these porcelain tiles from Daltile. They look like wood but hold up better in wet areas like bathrooms and entryways. And large dogs won't scratch them to ribbons. Tiles that look just like marble, brick and fabric are also available.   Contact us
Read more
Protect Your Floor During Remodeling Whenever you are remodeling, it's important to protect any un-carpeted floors from demolition debris and dropped tools. When canvas drop cloths aren't enough, I use 4 x 8 ft sheets of 1/8-in tempered hardboard, commonly called Masonite. Start by thoroughly vacuuming the floor so grit doesn't scratch the flooring under the hardwood. Then cut and lay down the hardboard and duct-tape the pieces together at the seams.  If you'll be running the HVAC system during the remodel, be sure you don't cover grilles or registers. Finally, seal around the perimeter with masking tape so grit cant get underneath the hardboard at the edges. A sheet of 1/8-in hardboard cost about $5 at home center. Gary Wentz   
Read more